Parts by Type

print This page

End Yokes

Filters: BRAND = PTI,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END STYLE DIFF MODEL NOTES VEHICLE CLASS BRAND
2604-10 7260 10 1.188 1.875 1.500 3.350 BS Chrysler 8.75 LD PTI
2904-10 7290 10 1.188 1.875 1.500 3.375 BS Chrysler 8.75 LD PTI
3104-10 1310 10 1.125 1.552 1.500 3.000 BS Dana 44 LD PTI
3504-10 1350 10 1.188 1.875 1.656 3.125 BS Chrysler 8.75 LD PTI
2604-10B 7260 10 1.188 1.875 1.500 3.350 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
2904-10B 7290 10 1.188 1.875 1.500 3.375 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
3504-10B 1350 10 1.188 1.875 1.500 3.375 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
3304-10 1330 10 1.375 1.750 1.750 3.188 UB Same as 2-4-4071,
U-bolt type		 LD PTI
3504-101 1350 10 1.375 1.750 1.500 3.188 UB LD PTI
3104-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD PTI
P6-4-1981-1 1710 10 1.960 2.812 3.000 5.000 HR Coupling shaft yoke HD PTI
P6-4-1981 1710 10 1.960 2.812 3.000 5.000 BP Coupling shaft yoke HD PTI
P6-4-3241 1710 10 2.000 2.938 2.562 5.188 BP HD PTI
P6-4-4601 1710 16 2.350 3.312 2.750 4.938 BP HD PTI
P6.5-4-1891 1810 16 2.350 2.875 2.750 5.500 BP Coupling shaft yoke HD PTI
P6.3-4-161 1760 16 2.350 2.875 2.750 5.500 BP HD PTI
P6-4-4601-1 1710 16 2.350 3.312 2.750 4.938 HR Coupling shaft yoke HD PTI
P6.3-4-161-1 1760 16 2.350 2.875 2.750 5.500 HR Coupling shaft yoke HD PTI
P6.5-4-1891-1 1810 16 2.350 2.875 2.750 5.500 HR Coupling shaft yoke HD PTI
3104-17 1310 17 1.310 1.739 1.181 2.595 UB GM 8.2 LD PTI
1404-22 1100 22/23 0.990 1.420 1.360 2.750 SR Use with 1453-232 or 3053-233 midship stub LD PTI
1404-231 1100 22/23 0.990 1.420 1.800 3.250 SR Use with 1453-232 or 3053-233 midship stub LD PTI
3004-231 1300 22/23 0.990 1.420 1.800 3.250 SR Use with 1453-232 or 3053-233 midship stub LD PTI
1204-241 1251 22/24 0.995 1.342 1.300 2.900 ISR Used on 2 piece Subaru shafts to replace the center CV section, ujoint part # 1251-22 LD PTI
3104-01 1310 23 1.031 1.552 1.500 3.000 BS Dana 28 Slinger 41498 LD PTI
3104-231 1310 23 1.260 1.562 1.625 3.062 BS Counterbore at hub end, Same as Dana 2-4-4441-1 LD PTI
3104-242 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
3504-243 1350 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
1204-261 1251 24/26 1.115 1.445 1.300 3.312 ISR Used on 2 piece Subaru shafts to replace the center CVJ, 1.73" inside ear to ear LD PTI
2304-261 2351 24/26 1.115 1.445 1.300 3.312 ISR Used on 2 piece Toyota shafts with 2351-20 Ujoint. Used with 1253-261 stub. 1.84" inside ear to ear LD PTI
2604-261 7260 24/26 1.100 1.450 1.300 3.250 ISR 0 Seal hub partially machined, 2.12" between inside ears LD PTI
2604-261M 7260 24/26 1.100 1.450 1.300 3.250 ISR 0 Seal hub machined all the way, 2.12" between inside ears LD PTI
3104-25 1310 25 1.085 1.521 1.500 2.875 UB GM 8.2 LD PTI
3104-252 1310F 25 1.098 1.812 2.625 4.375 UB Ford 8 U-bolt type LD PTI
3104-02 1310 26 1.146 1.844 1.375 2.938 BS Dana 35 LD PTI
3104-03 1310 26 1.146 1.552 1.500 3.000 BS Dana 30, 44, 50 LD PTI
3304-01 1330 26 1.146 1.552 1.500 3.000 BS Dana 44 LD PTI
3504-06 1350 26 1.146 1.552 1.500 3.000 BS Dana 44 3-70-28X STRAP LD PTI
3104-26CV 1310 26 1.146 1.552 1.500 3.000 CV LD PTI
3304-261 1330 26 1.146 1.552 1.500 3.750 BS Dana 44 03-06 Jeep Rubicon, 2-4-7791-1, no counterbore on splines LD PTI
3104-262CV 1310 26 1.146 1.614 1.500 3.000 CV DODGE/JEEP FRONT TC CV Conversion Yoke, Splines counterbored on bottom, Includes hub sleeve LD PTI
3304-262 1330 26 1.146 1.492 1.973 3.465 SR Toyota Mid-Ship Yoke snap ring style LD PTI
3104-263 1310 26 1.146 1.500 1.469 3.000 BS Same as Dana 2-4-7021-1 LD PTI
3304-03 1330 26 1.146 1.844 1.375 3.562 BS Dana 35 LD PTI
3304-263 1330 26 1.146 1.552 1.500 3.750 BS N/A 3153-302, 3153-252, 3153-254, 1.125 splines, 6mm counterbore on splines, 1" hub length LD PTI
1404-261 1100 26 1.129 1.416 1.824 3.265 SR N/A Midship end yoke, Merkur shafts, mates 1453-261 LD PTI
3104-264 1310 26 1.146 1.453 1.469 3.000 BS 0 Midship end yoke used on multiple applications. LD PTI
3104-261CV 1310 26 1.146 1.453 1.500 3.000 CV 0 CV style midship end yoke used to bolt up a open socket style CV head to a center section. LD PTI
3104-266 1310 26 1.146 1.500 1.469 2.875 SR 0 Snap ring style midship end yoke used on Nissan, Ford, Toyota shafts & more. (3153-252, 3153-302) LD PTI
3304-264 1330 26 1.146 1.552 1.312 3.500 BS N/A 3153-302, 3153-252, 3153-254, 1.125 splines, 6mm counterbore on splines, 0.85" hub length LD PTI
3104-266M 1310 26 1.146 1.450 1.469 2.875 SR 0 Same as 3104-266 but seal surface turned to 1.45" LD PTI
3104-268 1310 26 1.146 1.552 1.500 3.000 UB Dana 30, 44 takes 2-94-58X U-bolt kit, forged LD PTI
3104-267 1310 26 1.146 1.450 1.469 2.875 SR 0 Forged, PTI 26 spline midship stubs LD PTI
3504-260 1350 26 1.146 1.552 1.500 3.750 BS 3153-302, 3153-252, 3153-254, 1.125 splines 3-70-28X STRAP LD PTI
2904-27 7290 27 1.172 1.688 1.062 2.750 BS Chrysler 7.25, 8.25 LD PTI
3104-05 1310 27 1.188 1.521 1.475 3.185 BS GM 7.25 LD PTI
3104-27 1310 27 1.172 1.688 1.062 2.750 BS Chrysler 7.25, 8.25 LD PTI
3R04-01 3R 27 1.188 1.692 1.475 3.575 BS GM 7.5 Includes new pinion seal LD PTI
2604-27 7260 27 1.172 1.688 1.062 2.750 BS Chrysler 7.25, 8.25 LD PTI
3R04-271X 3R 27 1.170 1.942 1.287 2.866 UB GM 8.2 BOP 2-94-58X Ubolt Kit Included LD PTI
3104-07 1310 28 1.229 1.844 1.375 2.938 BS AMC 20 LD PTI
3504-02 1350 28 1.229 1.844 1.375 3.031 BS AMC 20 LD PTI
3104-08 1310 28 1.218 1.812 1.200 3.460 UB Ford 7.5 LD PTI
3104-28 1310 28 1.218 1.812 2.425 4.000 UB Ford 9 Forged / .500" Counterbore LD PTI
3304-06 1330F 28 1.218 1.812 2.425 4.000 UB Ford 9 .500" Counterbore LD PTI
3504-08 1350 28 1.218 1.812 2.425 4.000 UB Ford 9 LD PTI
3104-28A 1310 28 1.218 1.812 2.155 3.850 UB Ford 9 Billet aluminum, includes u-bolts and spacer (if required) LD PTI
3504-08B 1350 28 1.218 1.812 2.155 4.100 UB Ford 9 Billet steel, includes u-bolts and spacer (if required) LD PTI
3304-281 1330F 28 1.218 1.500 2.850 4.750 UB Fits T18,T19,T98 manual transmissions LD PTI
3304-282 1330F 28 1.218 1.812 2.425 5.000 UB Ford 9 LD PTI
3104-281 1310 28 1.218 1.812 2.430 4.100 UB Ford 9 takes 2-94-28X u-bolt kit, forged LD PTI
3304-283 1330 28 1.218 1.812 2.430 4.000 UB Ford 9 in takes 2-94-28X u-bolt kit, forged LD PTI
4104-291 1410 29 1.276 1.710 1.500 3.200 BS LD PTI
2604-29 7260 29 1.263 1.875 1.500 3.188 BS Chrysler 8.75, 9.25 LD PTI
2904-60 7290 29 1.276 1.875 1.500 3.359 BS Dana 60, 70 LD PTI
3104-29 1310 29 1.276 1.875 1.500 2.938 BS Dana 60, 70 LD PTI
3304-29 1330 29 1.276 1.875 1.500 2.938 BS Dana 60, 70 LD PTI
3504-01 1350 29 1.276 1.875 1.500 3.000 BS Dana 60, 70 LD PTI
4104-01 1410 29 1.276 1.875 1.500 3.188 BS Dana 60, 70 LD PTI
2904-29 7290 29 1.263 1.875 1.500 3.180 BS Chrysler 9.25 2970-29 LD PTI
3304-291 1330 29 1.276 1.750 1.500 3.188 BS Mates with stub 3153-291 and 3153-292 (use 16-74-101 nut)
 LD PTI
3504-60 1350 29 1.276 1.875 1.500 3.375 UB Dana 60 LD PTI
3504-291 1350 29 1.276 1.710 1.500 3.188 BS Mates with stub 3153-291 and 3153-292
(use 16-74-101 nut)		 LD PTI
3504-60B 1350 29 1.276 1.875 1.500 3.375 UB Dana 60 Billet steel, includes u-bolts and pinion nut LD PTI
2904-291 7290 29 1.263 1.875 1.500 3.180 UB Mopar 8.75 uses 2-94-58X u-bolt kit, forged LD PTI
3104-291 1310 29 1.276 1.875 1.500 3.000 UB Dana 44, 60 takes 2-94-58X u-bolt kit, forged LD PTI
3504-293 1350 29 1.276 1.875 1.500 3.000 UB Dana 44, 60, 70 takes 3-94-18X u-bolt kit, 1.900 clearance for nut, forged LD PTI
3504-292 1350 29 1.263 1.875 1.500 3.000 UB Mopar 8.75, 9.25 takes 3-94-18X u-bolt kit, 1.650" clearance for nut, forged LD PTI
3504-07 1350 30 1.328 1.739 1.200 3.375 UB GM 8.875 LD PTI
3104-09 1310 30 1.328 1.739 1.170 2.850 BS GM 8.875 Requires strap kit 2-70-28X LD PTI
3504-04 1350 30 1.312 2.110 1.150 3.125 BS GM 9.5 Has speedy sleeve on hub. LD PTI
3504-05 1350 30 1.590 2.200 1.642 3.913 BS GM 10.5 Requires strap kit 3570-20
Use Pinoin Seal 2286 to replace yokes with 2.372 hub diameter.		 LD PTI
3R04-02 3R 30 1.312 1.940 1.150 3.375 BS GM 8.5, 9.25 LD PTI
3R04-03 3R 30 1.312 2.110 1.150 3.375 BS GM 8.6 LD PTI
3304-05 1330F 30 1.312 1.812 1.275 3.145 UB Ford 8.8 LD PTI
3504-07B 1350 30 1.328 1.739 1.184 3.250 UB GM 8.875 Billet steel, includes u-bolts and spacer (if required) LD PTI
3104-30 1310 30 1.312 1.940 1.150 3.160 UB GM 8.5 LD PTI
3304-30 1330 30 1.328 1.739 1.190 2.600 UB GM 8.875 LD PTI
3104-301 1310 30 1.328 1.739 1.181 2.598 UB GM 8.5 Vette LD PTI
3R01-292 3R 30 1.312 2.110 1.150 3.125 SER Chrysler 9.25 Front Serrated Flange LD PTI
3104-302 1310 30 1.276 1.732 1.870 3.375 SR N/A infiniti center yoke LD PTI
3104-303 1310 30 1.312 1.940 1.375 2.850 UB GM 12 bolt takes 2-94-28X u-bolt kit, forged LD PTI
3504-302 1350 30 1.312 1.940 1.160 3.180 UB GM 8.5 takes 3-94-18X u-bolt kit, forged LD PTI
3504-301 1350 30 1.312 1.812 1.300 3.145 UB Ford 8.8 takes 3-94-18X u-bolt kit, forged LD PTI
4104-303 1410 30 1.590 2.200 1.650 3.950 UB GM 10.5, 14 bolt takes 3-94-18X u-bolt kit, forged LD PTI
3504-09 1350 31 1.343 1.812 1.640 3.500 BS Ford 10.25, 10.5 LD PTI
4104-03 1410 31 1.343 1.812 1.640 3.525 BS Ford 10.25, 10.5 1993 and up "long" 10.25 LD PTI
3504-03 1350 31 1.343 1.812 1.262 3.143 BS Ford 10.25 LD PTI
3304-07 1330F 31 1.343 1.812 1.262 3.150 UB Ford 10.25 Double check length thru the hole LD PTI
3304-08 1330F 31 1.343 1.812 1.640 3.500 UB Ford 10.25 Double check length thru the hole LD PTI
4104-31 1410 31 1.380 1.890 2.000 3.700 UB Counter Bore .21
Borg Warner TC 1356		 LD PTI
3504-31 1350 31 1.380 1.890 2.000 3.540 UB Counter Bore .21
Borg Warner TC 1356		 LD PTI
3503-324 1350 31/32 1.380 1.885 4.094 5.594 BS Replaces 3-4-13211-1 which was a bolt-on. This part has a welch plug that can be removed to make it a bolt on. Use with strap kit 3570-20. LD PTI
2604-32 7260 32 1.401 2.125 2.000 3.625 BS Fits 203/205 transfer case LD PTI
3104-321CV 1310 32 1.401 1.943 2.000 3.875 CV CV conversion yoke for 07 and up Jeep JK on front or rear output,
Splines counterbored top and bottom,
Includes hub sleeve		 LD PTI
3104-322CV 1310 32 1.401 1.943 2.000 3.875 CV 03-06 Jeep Rubicon with 241 transfer case LD PTI
3104-32CV 1310 32 1.401 1.875 2.000 3.875 CV TC NP 203/205 Same as 2-4-5341, Counterbored 0.30" LD PTI
2104-341 1210 34 1.102 1.535 2.421 SR BMW X3, X4 Threaded M39x1.5 LD PTI
P90-4-11-1 SPL90 34 1.790 2.500 2.250 4.062 BS Coupling shaft yoke HD PTI
P5-4-7171-1 1610 34 1.790 2.188 2.250 4.125 HR HD PTI
3504-35A 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 Billet aluminum, includes u-bolts and pinion nut LD PTI
3504-35B 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 Billet steel, includes u-bolts and pinion nut LD PTI
3504-35 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 takes 3-94-18X u-bolt kit, forged LD PTI
4104-02 1410 37 1.609 2.500 2.000 4.312 BS Dana 80 LD PTI
4804-01 1480 37 1.609 2.500 2.000 4.328 BS Dana 80 LD PTI
5504-01 1550 37 1.609 2.500 2.000 4.406 BS Dana 80 LD PTI
P5-4-6321-1 1610 38 1.998 2.750 2.125 4.000 HR HD PTI
P6-4-7141-1 1710 38 1.998 2.810 3.000 5.000 HR Coupling shaft yoke HD PTI
P6.3-4-821-1 1760 46 2.390 2.875 2.750 5.500 HR Coupling shaft yoke HD PTI
P250-4-21-1 SPL250 46 2.390 3.344 2.750 5.750 HR Coupling shaft yoke HD PTI
P6.5-4-3591-1 1810 46 2.390 2.875 2.750 5.500 HR Coupling shaft yoke HD PTI
P6-4-7481-1 1710 46 2.390 2.875 2.750 4.938 HR Coupling shaft yoke w/c'bore at hub end HD PTI
P170-4-1271-1 SPL170 46 2.390 2.879 2.750 5.590 HR Coupling shaft yoke HD PTI
P6.3-4-1681-1 1760 54 2.794 0.000 2.750 5.625 HR Hub diameter not ground. HD PTI